Air CD Disinf--High Concentration

{ClorDiSys equipment was used} Efficacy of ClO2 as a decontaminant is greatly enhanced at a relative humidity greater than 60% (1990 stu "some ClO2 continued to be sensed outside of the space... level did not exceed the Dräger tube sensitivity of 0.1 ppm. The mean concentration within the ICU/NICU during the decontamination was approximately 40 ppm" "a total ClO2dosage of ~400 ppm-hr was applied over a single evening" "ClO2 is a fairly selective oxidant, which is not expected to react with typical building materials (including wood) or soil. " "Future experiments within controlled spaces are in order to isolate the most significant absorption and/or reaction sites to aid in the practical design of decontaminations"

Spectrometer allows easy measure of chlorine dioxide because it's green. Odor makes even minor leaks self-alerting

Sterilization with ClorDiSys chlorine dioxide gas. Safe, corrosion free method. Destroy microbes, beta lactams, PCR amplicons and more. See our brochure.

Prehumidification, ultrasonic nebulization, times, concentrations. Bacillus subtilis subsp niger. 1989

The 17th Civil Engineer Squadron is employing a different type of way efficiently disinfecting the classrooms on base, a fog machine.

Selection of sensors ranging from $400-$2,300

**Links to several studies-This study assessed the efficacy of gaseous chlorine dioxide for inactivation of Bacillus anthracis, Francisella tularensis, and Yersinia pestis in a hospital patient care suite. Spore and vegetative cells of Bacillus anthracis Sterne 34F2, spores of Bacillus atrophaeus ATCC 9372 and vegetative cells of both Francisella tularensis ATCC 6223 and Yersinia pestis A1122 were exposed to gaseous chlorine dioxide in a patient care suite. Organism inactivation was then assessed by log reduction in viable organisms postexposure to chlorine dioxide gas compared to non-exposed control organism. Hospital room decontamination protocols utilizing chlorine dioxide gas concentrations of 377 to 385 ppm maintained to exposures of 767 ppm-hours with 65% relative humidity consistently achieved complete inactivation of B. anthracis and B. atrophaeus spores, as well as vegetative cells of B. anthracis, F. tularensis, and Y. pestis. Decrease in exposure (ppm-hours) and relative humidity (<65%) or restricting airflow reduced inactivation but achieved >8 log reductions in organisms. Up to 10-log reductions were achieved in a hospital room with limited impact on adjacent areas, indicating chlorine dioxide concentrations needed for decontamination of highly concentrated (>6 logs) organisms can be achieved throughout a hospital room. This study translates laboratory chlorine dioxide fumigation studies applied in a complex clinical environment.

Request PDF | Evaluation of Ambulance Decontamination Using Gaseous Chlorine Dioxide | Abstract Objective. We evaluated gaseous chlorine dioxide (ClO2) decontamination of an ambulance using a variety of bacterial biological agents.... | Find, read and cite all the research you need on ResearchGate

The HPV system was safer, faster and more effective for biological inactivation.

Surface contamination in hospitals is involved in the transmission of pathogens in a proportion of healthcare-associated infections. Admission to a room previously occupied by a patient colonized or infected with certain nosocomial pathogens increases the risk of acquisition by subsequent occupants; thus, there is a need to improve terminal disinfection of these patient rooms. Conventional disinfection methods may be limited by reliance on the operator to ensure appropriate selection, formulation, distribution and contact time of the agent.

"Results show that B. cereus spores in biofilms are more resistant to gaseous ClO2 than are attached spores not in biofilms. Gaseous ClO2 was, nevertheless, very effective in killing B. cereus spores in biofilm on the surface of stainless steel. Results show promise for application of gaseous ClO2 to enhance the microbiological safety of foods that may come in contact with stainless steel and possibly other hard surfaces on which B. cereus biofilms have formed. "

Chlorine dioxide (ClO2) gas is a novel and effective fumigation agent with strong oxidization ability and a broad biocidal spectrum. The antimicrobial efficacy of ClO2 gas has been evaluated in many previous studies. However, there are presently no published models that can be used to describe the k …

...At 12.4 ml/m3, hydrogen peroxide achieved a respective 2.5 ± 0.1 and 2.7 ± 0.3 log10 reduction in GI.6 and GII.4 NoV genome copies, and a 4.3 ± 0.1 log10 reduction in infectious FCV within 5 min. At the same disinfectant formulation concentration, chlorine dioxide-surfactant-based product resulted in a respective 1.7 ± 0.2, 0.6 ± 0.0, and 2.4 ± 0.2 log10 reduction in GI.6, GII.4, and FCV within 10 min; however, increasing the disinfectant formulation concentration to 15.9 ml/m3 negatively impacted its efficacy. Fogging uniformly delivered the disinfectants throughout the room, and effectively decontaminated viruses on hard-to-reach surfaces. Hydrogen peroxide delivered by fog showed promising virucidal activity against FCV by meeting the United States EPA 4-log10 reduction criteria for an anti-noroviral disinfectant; however, fogged chlorine dioxide-surfactant-based product did not achieve a 4-log10 inactivation. Future investigation aimed at optimizing decontamination practices is warranted

Recently, global public health organizations such as Doctors without Borders (MSF), the World Health Organization (WHO), Public Health Canada, National Institutes of Health (NIH), and the U.S. government developed and deployed Field Decontamination Kits (FDKs), a novel, lightweight, compact, reusable decontamination technology to sterilize Ebola-contaminated medical devices at remote clinical sites lacking infra-structure in crisis-stricken regions of West Africa ...The basis for effectuating sterilization with FDKs is chlorine dioxide (ClO2) produced from a patented invention developed by researchers at the US Army Natick Soldier RD&E Center (NSRDEC) ...We review the properties and structures of spores and the mechanisms of bacterial spore inactivation by ClO2... and present in detail assays using spore bio-indicators to ensure sterility when decontaminating with ClO2.

There is a stated Army need for a field-portable, non-steam sterilizer technology that can be used by Forward Surgical Teams, Dental Companies, Veterinary Service Support Detachments, Combat Support Hospitals, and Area Medical Laboratories to sterilize surgical instruments and to sterilize pathologi …

***** "The ClO2 gas concentration, RH and exposure time all significantly and positively correlated with the inactivation of B. subtilis subsp. niger spores." "...can predict a ClO2 gas treatment condition to achieve an effective sterilization of enclosed space"

ABSTRACT: Acidified Oxine (AO) is a mixture of chlorite and chlorine dioxide. At 7.8 ppm available chlorine dioxide (ACD) for 10 min, it reduced 7.4 log CFU/mL of Erwinia carotovora, a potato pathogen, in phosphate buffer. Exposing potatoes to air purged through AO solutions proportionally reduced inoculated E. carotovora. A 40% reduction of spoilage was achieved by exposing to AO of 100 ppm ACD under an accelerated test. AO was demonstrated to be potentially effective in preventing potato spoilage without any significant risks of chemical residual or change of skin color.

"Three gaseous decontamination technologies are examined for their suitability in reducing environmental contamination with C. difficile: gaseous hydrogen peroxide, chlorine dioxide and ozone. Air decontamination and UV-based technologies are also briefly described. We conclude that while there is a role to play for these new technologies in the decontamination of ward surfaces contaminated with C. difficile, the requirement for both a preclean before use and the limited 'in vivo' evidence means that extensive field trials are necessary to determine their cost-effectiveness in a healthcare setting."

A Head-to-Head Comparison of Hydrogen Peroxide Vapor and Aerosol Room Decontamination Systems - Volume 32 Issue 9 - T. Holmdahl, P. Lanbeck, M. Wullt, M. H. Walder

Experts agree that careful cleaning and disinfection of environmental surfaces are essential elements of effective infection prevention programs. However, traditional manual cleaning and disinfection practices in hospitals are often suboptimal. This is often due in part to a variety of personnel issues that many Environmental Services departments encounter. Failure to follow manufacturer’s recommendations for disinfectant use and lack of antimicrobial activity of some disinfectants against healthcare-associated pathogens may also affect the efficacy of disinfection practices. Improved hydrogen peroxide-based liquid surface disinfectants and a combination product containing peracetic acid and hydrogen peroxide are effective alternatives to disinfectants currently in widespread use, and electrolyzed water (hypochlorous acid) and cold atmospheric pressure plasma show potential for use in hospitals. Creating “self-disinfecting” surfaces by coating medical equipment with metals such as copper or silver, or applying liquid compounds that have persistent antimicrobial activity surfaces are additional strategies that require further investigation. Newer “no-touch” (automated) decontamination technologies include aerosol and vaporized hydrogen peroxide, mobile devices that emit continuous ultraviolet (UV-C) light, a pulsed-xenon UV light system, and use of high-intensity narrow-spectrum (405 nm) light. These “no-touch” technologies have been shown to reduce bacterial contamination of surfaces. A micro-condensation hydrogen peroxide system has been associated in multiple studies with reductions in healthcare-associated colonization or infection, while there is more limited evidence of infection reduction by the pulsed-xenon system. A recently completed prospective, randomized controlled trial of continuous UV-C light should help determine the extent to which this technology can reduce healthcare-associated colonization and infections. In conclusion, continued efforts to improve traditional manual disinfection of surfaces are needed. In addition, Environmental Services departments should consider the use of newer disinfectants and no-touch decontamination technologies to improve disinfection of surfaces in healthcare.

To evaluate the ability of ClO2 to decontaminate pathogens known to cause healthcare-associated infections in a hospital room strains of Acinetobacter baumannii, Escherichia coli, Enterococcus faecalis, Mycobacterium smegmatis, and Staphylococcus aureus were spot placed in duplicate pairs at 10 site …

Up to 10-log reductions were achieved in an ambulance interior following exposure to ClO2, indicating that gas concentrations needed to mitigate biological agent contamination can be achieved and maintained safely in an ambulance. Future studies are ongoing to evaluate gaseous ClO2 in other environm …

CD treatment of indoor furnishings contaminated with bioterrorism agents is poorly understood. Efficacy testing of decontamination products in a controlled environment is needed to ensure that effective methods are used to decontaminate domestic and workplace settings. An experimental room supplied with materials used in office furnishings (i.e., wood laminate, painted metal, and vinyl tile) was used with controlled dry aerosol releases of endospores of Bacillus atrophaeus (“ Bacillus subtilis subsp. niger ,” also referred to as BG), a Bacillus anthracis surrogate. Studies were performed using two test products, a foam decontaminant and chlorine dioxide gas. Surface samples were collected pre- and posttreatment with three sampling methods and analyzed by culture and quantitative PCR (QPCR). Additional aerosol releases with environmental background present on the surface materials were also conducted to determine if there was any interference with decontamination or sample analysis. Culture results indicated that 105 to 106 CFU per sample were present on surfaces before decontamination. After decontamination with the foam, no culturable B. atrophaeus spores were detected. After decontamination with chlorine dioxide gas, no culturable B. atrophaeus was detected in 24 of 27 samples (89%). However, QPCR analysis showed that B. atrophaeus DNA was still present after decontamination with both methods. Environmental background material had no apparent effect on decontamination, but inhibition of the QPCR assay was observed. These results demonstrate the effectiveness of two decontamination methods and illustrate the utility of surface sampling and QPCR analysis for the evaluation of decontamination strategies.

CD fumigation at 200 and 3,000 ppm