Air CD Disinf--Low Concentrations

Chlorine dioxide has become a widely used disinfectant during the COVID-19 pandemic. Even at very low concentrations, it is a fast-acting broad-spectrum surface

Recently, various regenerative therapies have been developed based on induced pluripotent stem (iPS) cells. However, hygienic control strategies have not been established at the manufacturing facilities. We aimed to evaluate the safety and effects of ...

****!!!!****!!!!**** [Might UV light be shined in an area after a fumigation to help decrease the concentration of chlorine dioxide (generally in combination with aeration)? Perhaps even when performing airborne applications of chlorine dioxide at very low levels, a substantial amount of UV light be shined at various intervals to significantly reduce or eliminate existing ClO2 in air to provide confidence that concentration is not being inadvertantly built up beyond desired and safe concentration levels??? ]

Low levels of chlorine dioxide in the air has been shown to reduce bacteria and fungi in the air. Thus improving air quality.

1- When it comes to purifying water according to the US Environmental Protection Agency chlorine dioxide is used in public water facilities to make water safe for drinking and other uses When adding chlorine dioxide to drinking water it helps get rid of viruses harmful pathogens and some types of

Spraying slightly acidic electrolyzed water (SAEW) has been considered as a potential approach to reduce airborne bacteria in laying-hen houses. In this study, the effects of spraying SAEW on airborne bacterial reduction were investigated in a laying-hen house as compared with using diluted didecyl …

****!!!!****!!!! "From these data, we propose that treatment with ClO(2) gas at very low concentrations in space is a useful tool for the growth inhibition of fungi in the fields of food, medicine, etc. without adverse effects."

"Chlorine dioxide is added to the A/C airstream to eliminate viruses, bacteria and bad odors!"

****!!!!****!!!!**** "Room Shocker 30 Day Time-Release will inhibit the growth and or prevent any new bacteria, mold, mildew, fungus, spoors and any dangers pathogens from developing while maintaining the air quality at toxic free optimum level delivering a clean and odor free environment. Unlike our Quick-Release products the Time-Release products allow you to stay safely and comfortably in the room while the product is working."

****!!!! Misting Systems The System Misting is a very simple moisture maintenance technology. Already popular in the USA, it can be applied to a variety of applications, mainly in Farm Shops displaying fres…

A method of generating a dry fog comprising nebulising a provided preparation and delivering said nebulised preparation to a desired density, including particles of a predetermined size, within a predetermined time.

[vc_row][vc_column][vc_column_text] Copy/Paste For Consumers How safe is the air you breathe? Our Air Purifier Pouch removes mold, viruses, and contaminants from the air around you for up to 45 days! [put your business name here] is your local source for the Air Purifier Pouch. Call us now at [put your phone number here] to breathe…

"It has the effect of deodorizing eight major odors: ammonia, methyl mercaptan, hydrogen sulfide, methyl sulfide, trimethylamine, methyl disulfide, styrene, acetaldehyde."

Convert a half barrel or other waterproof decorative container into an instant water garden

****!!!!****!!!!*** (2021) "To satisfy the 8-h Time Weighted Average (TWA) maximum exposure limit of 0.3 mg/m3 for ClO2 (OSHA 2020), ClO2 disinfection in the bicycle room was performed using 400 mL ClO2 solutions (at 250 mg/L)."

****!!!!****!!!!**** (2020) "hospital infectious disease ward in Taiwan" "For studying the factors affecting the disinfection efficiencies of the two treatment protocols, the relative humidity and temperature in the SR and DR were detected with a humidity temperature... A Q-TRAK IAQ Meter... was used to detect the airflow velocity and CO2 concentration. The luminance was measured using a TES-1335 Digital Light Meter (TES Electrical Electronic Co., Taiwan). Afterward, the number of individuals in the room on each sampling occasion was counted and recorded.""By comparing these two studies, it was found that the efficiencies were very different because in the present study, the space was not closed during the disinfection and people can come in and out freely."

"The two species could be measured separately with a limit of quantification of 3 ppm."

{Nanomist} The present invention is an improved method for decontamination of a space and an integrated device that completes the decontamination cycle extremely fast while still being compact, lightweight, simple to operate and easy to move as a single unit. The method of the present invention delivers less biocide than is used in prior art methods at a very high rate of flux, allows the biocide to reside in the space being decontaminated to achieve a predetermined kill level, and then aerates the space. Because a nominal amount of biocide is used, there is less biocide to remove from the space than in prior art methods thereby reducing the time required for aeration and shortening the downtime for safe entry of the facility.

****!!!!****!!!!*** Various devices allow for sanitization or disinfection by exhausting a dry fog biocide agent into an ambient environment. A nebulizer, for instance a vibrator that oscillates or vibrates at ultrasonic frequencies, nebulizes a biocide agent, for instance chlorine dioxide, peracetic acid, hydrogen peroxide, to create the dry fog. Such devices may withdraw the dry fog or biocide agent from the ambient environment after some period of time. Operational parameters of the devices may be tracked or monitored. Each device may implement tracking or monitoring. Additionally or alternatively, a separate tracking or monitoring system may track or monitor the operational parameters of one or more devices. Tracking or monitoring may include exception reporting, as well as other reporting.

****!!!!****!!!! Various devices allow for sanitization or disinfection by exhausting a dry fog biocide agent into an ambient environment. A nebulizer, for instance a vibrator that oscillates or vibrates at ultrasonic frequencies, nebulizes a biocide agent, for instance chlorine dioxide, peracetic acid, hydrogen peroxide, to create the dry fog. Such devices may withdraw the dry fog or biocide agent from the ambient environment after some period of time. Operational parameters of the devices may be tracked or monitored. Each device may implement tracking or monitoring. Additionally or alternatively, a separate tracking or monitoring system may track or monitor the operational parameters of one or more devices. Tracking or monitoring may include exception reporting, as well as other reporting.

{International Dioxide} A process and apparatus are provided for deodorizing malodorous solids, liquids, and/or gases by contacting them with a mist of an aqueous deodorizing solution... The deodorizing solution contains available chlorine dioxide and has a pH of about 8.5-9.5. In the process a concentrated solution of the deodorizing solution is diluted and mixed with water and misted into or onto the substance... The apparatus consists of a rotameter which measures the amount of the concentrated deodorizing solution introduced into an eductor for dilution in a passing water stream which is then transported to spray nozzles for misting the malodorous substance(s). Preferably, a timer or monitor is incorporated.."

****!!!!**** "the prototype will then be tested in accordance with an EPA-approved protocol entitled “Efficacy of a Disinfectant Applied to a Room Via a Fogger or Misting Device” against a panel of organisms. The results will be submitted to the EPA to register the technology as a room disinfection device and claim “hospital and broad spectrum” and “virucide” efficacy. "

****!!!!**** "Although the ClO2 decontamination process utilizes a commercially-available ClO2 generation technology (i.e., Selectrocide® micro-reactors) the fumigant application method is in early stages of development and requires further testing and optimization"