F.A.P 😏🤤

Norish - A realtime, self-hosted recipe app for families & friends - GitHub - norish-recipes/norish: Norish - A realtime, self-hosted recipe app for families & friends

Download this free 3D print file designed by MLoewe. This is the official FutureProof Home Inc. - Satellite1 Smart Speaker enclosure. Get all informations on https://futureproofhomes.net complete Kit available, too

Download this free 3D print file designed by lordjustice17. An add-on enclosure for the Home Assistant Voice Preview Edition that allows you to add a slightly bigger speaker (40mm) and a fabric covering akin to a Google Home or Alexa device. Note that the mute switch on the side is covered but you should still be able to slide it through the fabric as the enclosure has a cutout.Additional Parts:four small screws (roughly 10mm in length)piece of fabric roughly 15cm * 42 cm40mm speaker1.25mm two-pin micro JST connectorSteps:Using the main enclosure body as a reference you have to create an appropriately sized sleeve with the fabric (Easiest way is to turn it inside out, wrap it around the enclosure and mark where the two ends meet, then sew along that line. You can then cut off the excess material and turn it right side out again so the seam is inside).Open the Voice PE and unscrew the the PCB and remove the original speaker.Remove the Grove port cover.Solder JST connector to speaker terminals (black to negative, red to positive).Seat the speaker into the speaker bracket facing downward (it should friction fit, but if loose you can secure with some glue).Insert speaker bracket into the bottom of the main enclosure so that the JST wire is at the top and then secure with screws.Feed the JST wire through the Grove port hole and connect it to the speaker JST port.Screw the PCB back into the original case and screw the top back on.Slide the fabric sleeve over the main enclosure with enough excess on both top and bottom to fold it in.Fold the top fabric in and then slide the Voice PE into the top to secure it in place.Fold the bottom fabric in and then slide the bottom cover in to secure it in place.Cut out the fabric that covers the inputs on the back and insert the input cover.[Optional] Add some rubber feet or adhesive cork to the bottom for a bit of grip if you like. If you want a version without the fabric you should check out the model freeskier93 made. It was a useful reference when I was looking into what speaker and connectors I needed.Large Speaker Version To test the limits of this design I modeled a second profile that allows you to use a 2.5" (roughly 61mm) speaker instead of the 40mm one in the main profile. This size seems to be the largest speaker that will fit inside the chassis as I couldn't find anything reasonably priced that was between 2.5 and 3" in size, with the latter being too large to fit. This speaker definitely has more range, especially bass, than the 40mm version, however, I'm not sure I can recommend it over the original version. The extra bass gives a better sound, however I've noticed that the play in the scroll wheel means that when you use the larger speaker at full volume it tends to vibrate and create a bit of a rattle. It's possible this could be mitigated with some sort of gasket or dampening material.It does have increased volume over the original version as well, however the increase is not as substantial as would be expected by the size increase as it seems limited by the wattage that the Voice PE can output. I suspect these speakers would have quite a bit more volume if attached to a higher wattage device.

Expecting restock mid-January and will resume sales! Thank you for your support! Home Assistant Voice Preview Edition is the open source, privacy-focused voice assistant built to seamlessly connect with Home Assistant, and preview the future of voice today. Its advanced audio processor and dual microphones allow it to

So I decide to pre order one as it looks exactly what I need. Hopefully UK deliveries will happy June/July time. Would like to hear from those...

Just found this on YouTube and was wondering what you thought of it? As a person playing around as lot with the assist feature, and are tired of...

A Practical, Open Source, Privacy-Focused Platform for Voice Assistants and other Applications

A Practical, Open Source, Privacy-Focused Platform for Voice Assistants and other Applications

Shipping Begins in February!  Pre-Order now! Transform our Satellite1 Voice Assistant Dev Kit into a beautifully crafted 20-watt, 2-way smart speaker. Enjoy rich sound and seamless multi-room music across multiple Satellite1 units with our built-in Snapcast integration (Sendspin support coming soon!). Best of all, talk

The Satellite1 PCB Dev Kit contains the two PCBs necessary to build your own completely private voice assistant and multi-sensor with XMOS advanced audio processing and music playback. This Dev Kit focuses on controlling your smart home via the Home Assistant platform and their incredible Assist voice control pipeline. With some extra hardware and software you can even power your Satellite1 with your own local LLM.

Download this free 3D print file designed by Enginseer. dAMS: Low-Profile Active Dehumidifier for Bambu Lab AMSTired of battling filament humidity? Introducing dAMS (dehumidified AMS), a low-profile active dehumidifier mod for your Bambu Lab AMS. This innovative design integrates an RS2 solid-state dehumidifier directly into your AMS, providing a powerful and efficient solution to maintain optimal filament conditions.The dAMS doesn't just passively absorb moisture; it actively works to regulate humidity levels within your AMS and can even slowly dry your filaments as they sit. Say goodbye to popping, stringing, and failed prints caused by moisture-laden filament!Key Features:Active Dehumidification: Utilizes an RS2 solid-state dehumidifier for continuous and effective moisture removal.Filament Drying Capability: Gently dries your filaments over time, ensuring they are always print-ready.Low-Profile Design: Blends seamlessly with your AMS without adding significant bulk.Improved Print Quality: Helps prevent common humidity-related printing issues like bubbling, stringing, and weak layers.Easy Integration: Designed for straightforward installation into your existing Bambu Lab AMS.Keep your filaments in prime condition and unlock more reliable, high-quality 3D prints with the dAMS. Your AMS just got an upgrade! Important Disclaimer: This is a permanent modification to your Bambu Lab AMS and requires cutting a hole in the lid. This may void your AMS warranty.Required Tools (Minimum):SawDrillSoldering IronKnife/ScalpelRecommended for Best Quality:Ultrasonic knife for precise cutting of the AMS lid.Drill pilot holes for screws and use slow speed and drill with caution so you don't crack the plastic..Clean up any burrs after cutting and drilling to ensure a good, airtight connection.Assembly Guide:Prepare the components for assemblyPlace the VREG2 USB-C power board into the DC converter bracket (tight fit)Check board orientation, usb-c connector should not be obstructedThread the prepared dc power cable trough the Base PlateConnect the JST connectors XHPlace the DC converter bracket with the VREG power board into the Base PlateCheck OrientationUse 2 BT2x6 SHCS Self Tapping Screw (20PCS) - AA093 to secure the bracketCut the Gasket Plug with a scalpel or knife along the 2 channelsCarefully push the wires trough the cuts into the holes in the Gasket PlugSeal the base plate by slideing the Gasket Plug into its place in the Base PlateRS2 Membrane Dehumidifier into the base plate and secure it with 2 BT2x6 SHCS Self Tapping Screw (20PCS) - AA093Thread the power wires trough the gasket plate and connect them to the RS2 Membrane Dehumidifier. USE the INDICATOR on the Base Plate and Dehumidifier for proper orientation. Double check the polarity as connectic the wires in reverse can and will fry your dehumidifier.Use 6 M3x20 SHCS Machine Screw (10PCS) - AA040 to secure the Base Plate assembly  to the side of the AMS with the Back Plate.Place Wire cover over the exposed wires in the Back Plate.Tighten the M3X20 screws until the gasket plate is compressed for a good airtight seal.Place protective cover on the Base Plate and secure it with 4 BT2x6 SHCS Self Tapping Screw (20PCS) - AA093 screws. Congratulation your dAMS is ready!  Boost MeI love the prototyping process in 3D printing—constantly refining designs through multiple iterations. It's incredibly rewarding and leads to a much better final product! This process does use a good bit of filament, though. If you appreciate this design and want to support more of my work, please consider a boost to help cover those material costs. Your support is truly valued, and I'll personally thank you!

Description Dial v1.1 is a high-performance, multifunctional embedded development board that has been fully upgraded from the original Dial product. The new version features the Stamp-S3A as the main controller, further enhancing system processing power and stability. Additionally, the core module antenna and buttons have been optimized to effectively improve wireless communication performance and user interaction experience. The product is equipped with a 1.28-inch round TFT touch screen and a high-precision rotary encoder, and includes an RFID detection module, RTC circuit, onboard buzzer, and under-screen buttons to enable device interaction and wake-up alerts. The power supply solution supports DC 6～36V wide voltage input and includes a lithium battery interface and charging circuit to meet diverse application needs. Furthermore, the reserved PORT.A and PORT.B interfaces facilitate the expansion of I2C and GPIO devices. This product is applicable in smart home control, IoT applications, smart wearables, access control systems, industrial control, and educational maker projects. Features Round TFT touch screen Stamp-S3A as the main controller Rotary encoder RFID detection module Wide voltage input Interface expansion: Reserved PORT.A and PORT.B interfaces Development Platform UiFlow2 Arduino IDE ESP-IDF PlatformIO Includes 1 x Dial V1.1 1 x L-shaped 1.5mm hex wrench (compatible with M2 screws) 1 x 2.54-2P terminal Applications Specifications Specification Parameter SoC ESP32-S3FN8@Dual-core Xtensa LX7, 240MHz USB USB OTG, USB Serial/JTAG Flash 8MB Wi-Fi 2.4 GHz Wi-Fi Wide Voltage Input Range DC 6 ~ 36V Screen Driver GC9A011.28 Inch 240 x 240px Touch Driver FT3267 RFID WS1850S @ Tag operating frequency: 13.56 MHz, ISO/IEC 14443 Type A/Type B protocol Encoder Resolution: 16 positions, 64 pulses/rev Buzzer 80dB Battery Socket Specification 1.25mm-2P Sleep Current USB supply: DC 5V@6.84mA (LDO idle power consumption)Battery only: DC 4V@6uA Operating Current USB supply: DC 5V@88.19mABattery only: DC 4V@100mA Power Interface Specification Model KF2EDGV-2.54-2P, straight pin design, 2.54mm pitch (2Pin), green Operating Temperature 0 ~ 40°C Product Size 51.0 x 51.0 x 32.3mm Product Weight 46.2g Package Size 71.9 x 71.9 x 57.4mm Gross Weight 61.0g LEARN AND DOCUMENTS DOCUMENTS

A power module to add additional power when connecting multiple HUB75 LED matrix panels. Powered via USB-C

A data cable that allows you to connect multiple LED matrices (HUB75) panels.

HUB75 Matrix panel only.M-1 LED Matrix controller not included. Controller necessary to use HUB75 panel.P2.5 or 2.5mm Pitch (Spacing between LEDs)Show some love to the WLED-MM team! https://github.com/MoonModules/WLED-MMSpecial thanks to Netmindz for their help! https://github.com/sponsors/netmindz

The Aqara Smart Lock U400 provides a practical and convenient unlocking experience for users with UWB-enabled iPhone or Apple Watch. Buy online now at apple.com/uk

Smarter Shopping, Better Living! Aliexpress.com

The eSun eVacuum 3D Print Filament Vacuum Storage Bag kit helps to keep 3D printing filaments away from moisture and dust. With a new USB-powered air pump, it is reliable and easy to use. Learn More.

Posted in r/3Dprinting by u/kentnek • 214 points and 58 comments

Best reusable filament storage bags with vacuum pump for your 3D printer. Seal and protect your filaments without the need for a filament dryer box.

Details Smooth Edge: The rounded and smooth edges not only add to the aesthetics of the product but also improve the safety of use.Silver Color: It gives this product a generous appearance, allowing it to easily blend into your cabinet.ApplicationIt is installed in the kitchen cabinet. It is suitable for organizing and storing kitchen supplies, cleaning tools, baking trays, etc. in the kitchen.SpecificationMaterial: IronColor: SilverShape: CircularInstallation Required: YesNumber of Tiers: 2Recommend Cabinet Width: ≥80.0cm/31.5inRecommend Cabinet Depth: ≥80.01cm/31.5inEach Basket Load-bearing Capacity: 8kg/17.64lbsAdjustable Height: 54.4-77cm/21.4-30.3inCradle Height: 7.5cm/2.95inProduct Diameter: 71cm/27.95in Package Included1* Corner CabinetNotes1.Please ensure to verify the dimensions of your cabinet before placing an order to avoid any inconvenience due to mismatched sizes.2.Please pay attention to the hinge close to the lower basket, so that you can choose the size maximum close to the cabinet space.

Find {productName} at Bunnings. Visit your local store for the widest range of products.

Description: Maximise every inch of your kitchen with this 270-degree rotating corner cabinet basket. The 2-layer shelf fit most 900mm cabinet and offers generous vertical storage for various height items. It transforms hard-to-reach spaces into functional storage for daily items like condiment, kitchen gadgets, dishes, and containers.With a diameter of 810mm and 2 tier design, this rotating rack offers generous storage space and support up to 14kg. Each shelf has raised guardrails to prevent items from falling, and the rounded edges ensure safe handling. Made from electroplated iron, the basket is resistant to rust and easy to clean.FeaturesSpace-Efficient Blind Corner Storage: With a 270-degree rotation, the corner rack allow easy access to items deep inside the cabinet. It also supports better visibility of your stuff, minimizing the chances of losing or forgetting what's stored in the back. This greatly improves kitchen efficiency and prevents wasted space.2 Tier Large Space: With a diameter of 810mm, the 2-layer shelf fit most 900mm cabinet and offers generous vertical storage to maximise your cabinet's internal space, reducing clutter. Both tiers are independently mounted on a central pole, allowing adjustable height to accommodate different item sizes.Sturdy and Stable Constructure: Made of high-strength iron, with a chrome electroplated finish, this organiser not only offers maximum 14kg load-bearing capacity, but also forms a protective barrier that helps prevent rust, scratches, stains, and moisture damage.Enhanced Safety: Both tiers are equipped with heightened guardrails to securely hold items in place, preventing them from falling during rotation. All smooth edges are carefully rounded to prevent accidental scratches or cuts, ensuring a safe use during access and cleaning.Easy installation and Maintenance: The kitchen corner shelf organizer includes a central pole with multiple mounting holes for easily adjusting heights. Including all necessary screws, the installation is straightforward. It can be easily placed to the blind left or blind right cabinet. The smooth surface is also easy to clean with cloth wipe.SpecificationMaterial: Iron with electroplated finishProduct Dimensions: Dia.810 x (height 560-790)mmInstallation Cabinet Size: Most 900 mmMax Load Capacity: 14kgRotation Angle: 270 degreesPackage Dimensions: L820 x W200 x H720mmWeight: 6.86kgPack Content1x Corner Kitchen Organizer1x User Instruction

The kitchen corner cabinet has a 270° rotating basket. Compared with 360°, it is more convenient to take items, and you can directly take items on the left and right sides

Download this free 3D print file designed by Kong 3D. I couldn't find any drawer with full extension capability so I create this. The slot to attach the rails to the drawer and the box should be fit enough so you don't need to glue them together. However, due to the slightly difference in print quality, you might end up needing to glue it but still.. it's not that hard to do anyway.Dimension of the drawer is 100 mm width x 105 mm height x 180 mm depth. Assembly guide1. Attach the rail with the side of the box first (using the lower slot)2. Then attach the rail with the drawer (using the upper slot)