DATA BRACELET 13.56MHz RFID/NFC Bracelet - NTAG213 Chip
This is a blank 13.56MHz RFID/NFC Bracelet with an NTAG213 chip - often used for train/bus passes, information sharing, contactless payment, but also found in other ...
SEWABLE NFC BUTTON SO COOL 13.56MHz RFID/NFC Black Sewable Button - NTAG213
This is a blank 13.56MHz RFID/NFC Laundry Tag Button with an NTAG213 chip - often used for laundry or garment identification, information sharing, contactless ...
Adafruit Feather RP2040 with DVI Output Port - Works with HDMI
Wouldn't it be cool if you could display images and graphics from a microcontroller directly to an HDMI monitor or television? We think so! So we designed this RP2040 Feather that has a ...
799
Nordic Webinars
Adafruit Feather 32u4 Radio with RFM69HCW Module
Send your message far and wide
$ 4 SMA to uFL/u.FL/IPX/IPEX RF Adapter Cable
This RF adapter cable is super handy for anyone doing RF work. Often times, small electronics save space by having a pick-and-placeable u.FL connector (also called uFL, IPEX, IPAX, IPX, MHF, ...
$20, comes with radio transceiver Adafruit Feather RP2040 RFM69 Packet Radio - 868 or 915MHz Lipoly battery and USB cable are not included, but we do have lots of options in the shop if you'd like!
This is the Adafruit Feather RP2040 RFM69 Packet Radio (868 or 915 MHz). We call these RadioFruits, our take on an microcontroller with packet radio transceiver with built-in USB and battery charging. It's an Adafruit Feather RP2040 with a RFM69HCW 900MHz radio module cooked in! Great for making wireless networks that are more flexible than Bluetooth® LE and without the high power requirements of WiFi.
It's kinda like we took our RP2040 Feather and RFM69 900MHz breakout board and glued them together. You get all the pins for use on the Feather, the Lipoly battery support, USB C power / data, onboard NeoPixel, 8MB of FLASH for storing code and files, and then with the 8 unused pins, we wired up all the DIO pins on the RFM module. There's even room left over for a STEMMA QT connector an a uFL connector for connecting larger antennas.
This is the 900 MHz RFM69 packet radio version, which can be used for either 868MHz or 915MHz transmission/reception - the exact radio frequency is determined when you load the software since it can be tuned around dynamically. Despite calling it a 'packet' radio (and it does send packets of data) the RFM69 can also be used for non-packetized radio transmission and reception.
Internet-in-a-Box - Mandela's Library of Alexandria
Internet-in-a-Box is a tiny, powerful 'Digital Library of Alexandria' that can be set up by any school, medical clinic or community worldwide.
sudomesh/node-whisperer-program: Node Whisperer Program is designed to help guide what you need to know to tell others how to operate a mesh network
Node Whisperer Program is designed to help guide what you need to know to tell others how to operate a mesh network - sudomesh/node-whisperer-program
sudomesh/disaster-radio: A (paused) work-in-progress long-range, low-bandwidth wireless disaster recovery mesh network powered by the sun.
A (paused) work-in-progress long-range, low-bandwidth wireless disaster recovery mesh network powered by the sun. - sudomesh/disaster-radio
disaster.radio | a disaster-resilient communications network powered by the sun
disaster.radio is a disaster-resilient communications network powered by the sun.
RadioLib/examples/LoRaWAN/LoRaWAN_Starter/notes.md at master · jgromes/RadioLib
Universal wireless communication library for embedded devices - jgromes/RadioLib
ese notes are for someone who has successfully created a few sketches for their Arduino based device but is starting out with LoRaWAN. You don't have to be a C++ coding ninja but some familarity with C++ and procedural programming is assumed
LoRaWAN is an amazing system for small battery powered sensors collecting data for years at a time. With great features comes some more complex elements which means it is not quite as simple as just providing WiFi credentials and pushing data through. It is in the range of setting up & customising the settings for a home router but with no wizards to do the heavy lifting for you. So we strongly recommend spending a couple of hours reviewing the TTN Getting Started section so you are aware of the minimum knowledge to make a successful start: https://www.thethingsnetwork.org/docs/lorawan/.
This sketch isn't particularly aimed at The Things Stack (TTS) but you can get a free Sandbox account and the following instructions are for that. Chirpstack works just as well, but the buttons and labels may have different names. We discourage the use of Helium as it does not support LoRaWAN v1.1 and has some other odd limitations.
t is simpler to register your gateway first. If you don't have a gateway, then a The Things Indoor Gateway (TTIG) is a very affordable option.
LoRa stands for Long Range - having the gateway & device on the same desk tends to overload both receiver circuits when they hear a transmission so close to hand. The gateway should be 5 - 10m away, preferably with a solid wall in the way as well.
Onced logged in to the console you can go in to Applications to create your first application. The ID must be all lower case or numbers, no spaces, dashes are OK and it has to be unique to the entire TTN community - so first-app will be rejected - you could use your-username-first-app
You are making your own device using a third party LoRaWAN stack so there will not be an entry in the device repository so choose 'Enter end device specifics manually'.
Choose LoRaWAN 1.1.0 - the last one in the list - the latest specfication. RadioLib uses RP002 Regional Parameters 1.0.4.
use all zero's as recommended by The LoRa Alliance TR007 Technical Recommendations document. Once you've put in all zeros and clicked confirm you will be asked for a DevEUI, AppKey and NwkKe
For development purposes however we need to turn off one of the security settings so that you can join & uplink out of the normal sequence that a device in the field would do.
Resets join nonces' option. You will see a warning about replay attacks which is entirely proper & correct
Adjustable 60W Pen-Style Soldering Iron - 120VAC USA Plug
You re-work hard all day, so treat yourself with the BEST portable Adjustable Soldering Iron we carry! OK, "Best" may be subjective, but it's also the name of the brand, ...
Fully Adjustable PCB Clamp Holder
This fancy and ultra-adjustable PCB holder was recommended to us by Collin, who is not only a maestro at soldering but also has impeccable taste in furnishings, so we just had to get these ...
T-Lora Pager Meshtastic super cool, can be used as a prototype to shoot for but wayyy cheaper
T-Lora Pager is the new member of the LILYGO T series, the compact exterior and foldable external antenna design, fully utilize the wireless performance while keeping the device aesthetically pleasing. “ With LR1121 Module [K257-04] version supports three LoRa frequency bands: 868 MHz, 915 MHz, and 2.4 GHz.” Core Funct
2PCS 1.5W RDA1846S Chip Walkie Talkie Module by NiceRF on Tindie
2pcs/lot All-in-One walkie talkie module SA828 (UHF band:400~480MHz)
LILYGO® T-Watch-S3 Programmable Touchable Watch by Lilygo on Tindie
LILYGO® T-Watch-S3 Programmable Touchable Watch Integrated ESP32-S3 WIFI Bluetooth LoRa BMA423 Sensor MAX98357A Mic Speaker
LILYGO® T3 S3 V1.0 ESP32-S3 LoRa SX1280 2.4G by Lilygo on Tindie
LILYGO® T3S3 V1.0 ESP32-S3 LoRa SX1280 2.4G Development Board WiFi Bluetooth Wireless Module 0.96 Inch OLED Display Type-C
LILYGO® TTGO T-Call V1.4 by Lilygo on Tindie
LILYGO® TTGO T-Call V1.4 ESP32 Wireless Module SIM Antenna SIM Card SIM800L Module(H317)
LILYGO® TTGO T-SIM7000G SIM Development Board by Lilygo on Tindie
LILYGO® TTGO T-SIM7000G Module ESP32-WROVER-B Chip WiFi Bluetooth 18560 Battery Holder Solar Charge Development Board（H388）
Male Micro-USB Breakout Board: Inject Power & Data by Questwise Ventures on Tindie
Inject custom power and data into Micro-USB devices using your own circuits—ideal for embedded, battery, or solar-powered projects.
GL.iNet GL-SFT1200 (Opal) Portable WiFi Travel Router, Mini VPN Wireless Router for Fiber Optic Modem, Mobile Internet WiFi Repeater, Dual Band Openwrt Computer Routers, Home/Business/RV/Cruise
Opal (GL-SFT1200) Opal (GL-SFT1200) is a pocket travel router that supports 1200Mbps wireless transmission speed. Using SPI NAND flash technology, the memory capacity has doubled from 64MB to 128MB, and the performance is smoother. This router has a maximum Wi-Fi speed of 300 Mbps (2.4GHz) & 867M...
GL.iNet GL-MT300N-V2 (Mango) Portable Mini Travel Wireless Pocket VPN WiFi Router - 2X Ethernet Ports | USB 2.0 | OpenWrt | OpenVPN/Wireguard for Public & Hotel Wi-Fi | Easy to Set up via Admin Panel
Mango (GL-MT300N-V2) is an upgraded model that features the new MT7628NN chip, which has doubled the RAM capacity from 64MB to 128MB, ensuring smoother performance. With a maximum Wi-Fi speed of 300Mbps, this router offers improved Wi-Fi stability through the MTK driver and faster OpenVPN encrypt...
NGFF M.2 to USB 3.0 Adapter,Dual SIM Card Slot LTE Modem,with Antenna Screw,Support SIM Card Push Connector,Suitable for LTE/4G/5G Module
Specification:
Item Type: NGFF M.2 to USB3.0 Adapter
Material: Printed Circuit Board
Interface: USB3.0
Support: SIM Card Push Connector
Applicable To: For LTE/4G/5G Module
Package List:
1 x NGFF M.2 to USB3.0 Adapter2 x Antennas
2 x Screws
1 x Nuts
1x Screwdriver
SATA SSD to USB Adapter
SATA SSD to USB Adapter - A compact USB 3.0 storage for your Raspberry Pi 5 & Pi 4. Perfect for media and backups.
sbcshop/Pitalk_4G_HAT_Software: The PiTalk 4G HAT is a handy, low-power Raspberry Pi HAT that features multi-communication functionalities such as GSM, GPRS, TCP, etc. It allows your Pi to easily make phone calls, send messages, connect to wireless networks, and so on. It is the most convenient IoT HAT that works with all variants of Raspberry Pi (model A, B and Zero). The users
The PiTalk 4G HAT is a handy, low-power Raspberry Pi HAT that features multi-communication functionalities such as GSM, GPRS, TCP, etc. It allows your Pi to easily make phone calls, send messages, ...
Techship MC201 Adapter (M.2 key B to USB-C, Dual SIM)
Techship MC201 Adapter for M.2 Key B modems with USB-C interface. Features dual SIM slots for flexible cellular module development and testing.
Raspberry Pi Zero Wireless WH (Pre-Soldered Header)
Canadian source for Raspberry Pi, Arduino, Micro:bit, DIY electronics, robotics, and educational products. Raspberry Pi approved distributor for schools, commercial and personal projects. Microbit accessories and educational kits. Huge collection of Adafruit and SparkFun products in stock.
Raspberry Pi Dual-Band 5GHz/2.4GHZ USB WiFi Adapter with Antenna
Canadian source for Raspberry Pi, Arduino, Micro:bit, DIY electronics, robotics, and educational products. Raspberry Pi approved distributor for schools, commercial and personal projects. Microbit accessories and educational kits. Huge collection of Adafruit and SparkFun products in stock.