Easily create your own Gridfinity system with this free, interactive tool. Export your designs as STL files

MagSlide – Sliding Monitor Dock for MagSafe & Apple WatchA simple, modular dock that mounts to your monitor and holds your MagSafe and Apple Watch chargers with a clean, slide-in fit.It’s a frame that sticks to the back of your monitor with strong two-sided tape (Alien Tape or 3M VHB recommended), and a slider insert that securely holds your magnetic wireless charger. Inspired by YouTuber Bob “I Like To Make Stuff” and their quick-rotating design they posted recently. I tried to simplify the approach by not using any rotating mechanisms but still have the ability to hide the charger when not using it.Details:Fits MagSafe and Apple Watch charging pucksMultiple sizes are included in a single print profile to fit various MagSafe models. If your MagSafe charger doesn't fit and you can accurately measure it with calipers, just leave a comment with the outer diameter and thickness. I’ll add it for you.Original Fusion file included if you want to tweak for your own purposesPETG is ideal so the little tabs can flex. I’m using PLA for mine and it works fine, but PETG should be slightly better.Install Procedure:Install your charging puck (MagSafe or Apple Watch) into the slider and route the cable out the backSlide the insert into the main frameToo much or too little friction on the slider? You can hit each tab with a lighter for about 3 seconds to soften the plastic. Then gently adjust as needed. Adhere strong two-sided tape (Alien Tape or 3M VHB recommended) to the angled face of the frameClean the back of your monitor with rubbing alcohol – make sure it’s really clean!Before sticking it down: attach your phone or watch to the puck, fully extend the slider, and carefully position it exactly where you want it. Then stick the frame down to the monitor and you are done.Need to remove the puck later? Just slide the insert back out of the frame!Fusion File IncludedI’ve included the original Fusion file in case you want to make adjustments or customize it to better suit your setup. Not everyone shares their source files, but I know it’s helpful. The model is parametric and organized to make edits as easy as possible.ChangesV1.0 - 2025-04-06 Initial release.V1.1 - 2025-04-12 Adjusted frame, changed print orientation.V1.2 - 2025-04-13 Adjusted Slider body so puck can be removed without unplugging the cable. Added optional Long Slider for portrait orientation. 45mm longer than regular version. Includes detent to stop at “landscape” spot. May conflict with camera bump depending on case.Adjusted Frame to be 4mm taller to avoid potential conflict with back of monitor.V1.2b - 2025-07-01Added Sliders for certain MagSafe chargers with detachable cables. Refer to print profile, “Other” plates.“Other - 60mm + Detach Cable” - ESR HaloLock/Kickstand, etc.“Other - 55.6mm + Detach Cable” - Rolling Square Edge Pro Wireless Charger, etc.SupportIf you REALLY like this model and want to buy me a beer, you can find me here. Whether it’s feedback or just a nod of appreciation, I’m always happy to hear from people. But let’s be real - the most effective form of communication is cold, hard cash (or beer).Note on ExclusivityI’m trying out MakerWorld’s “Exclusive Model” feature, which means remixes are forced to be disabled. Not ideal, and I don't like it. Original parametric Fusion source files are included (and STEP), so you can still customize however you like. Shoot me a note if there is something you would like added or modified :)  

Boost MeAny boost would be greatly appreciated!Layered art with translucent PETGThe color changes depending on the lighting and number of layers!Hand-drawn by us, edited using the ShadowBox Maker, and modified in Bambu StudioAMS is not needed; each layer is a different color. https://www.tiktok.com/@jefflynn3d/video/7535213628916534559 Check out our shadow box collection here:https://makerworld.com/en/collections/6885171-shadow-box 

Chainsaw Key CoverBoost MeIf you enjoyed this model, your boost would make my day! Thank you so much for helping me create more free models! This is a funny idea that popped into my head and I couldn't stop thinking about it so I had to make it :)It's possible to clip it together without glue, but depending on the print quality you might need a drop of glue in some places. Assembly Instructions 

This catch-all tray/dish is one of several similar designs available on my page. It can be used for keys, change, jewelry, or other small items- or simply for display.  It's an easy, no support print using the provided print profile which has split the object into parts with by object settings to ensure the decorative detail prints properly. Oh, and psst- the lovely surface design is just a combination of easy top surface settings and using tricolor or even dual color filaments *single color or gradient filaments will not produce the same results*. If you want to see how it's done, check out my how-to post on the forum here: https://forum.bambulab.com/t/make-your-models-surface-pop-with-a-simple-slicer-hack-6-easy-steps/150995?u=ominous_fyxen Print profiles are provided for tricolor matte PLA and one for a mix of wood and tri-color matte PLA- the wood PLA profile is for a .6mm hardened steel nozzle to help handle the more abrasive wood filament and reduce the chance of clogging- which is more likely with smaller stainless nozzles.  If you like this design, I have several other similar models with this lovely geometric pattern and more in development, so follow me or stop back on occasion to check them out!

Another day, another deck box concept! This time, I wanted to do something more artistic and colourful. It took me four trials re-modeling the same deck from scratch to get the perfect smooth curvature on the edges!CardsThis deck box fits 60 single-sleeved standard 88 mm x 63 mm cards. This is the default format for Magic: the Gathering and Pokemon cards.Looking for the 100 CARDS VERSION? Find it HERE.UpdateNew lid profiles (August 7th). After many feedbacks, I created a new profile with a more loose fitting lid. That should help people that previously had trouble with too much friction. It also helps with the installation of magnets.100 cards version (August 8th). It's now available here.Boost MePaint some colour on my work with a free boost! Printing instructionsChoose two of your favourite brightest colours and print each part separately! This deck box comes into two variants:Base variant (yellow and magenta in the sample pictures): only the top and bottom part.Droplets variant (blue and green in the sample pictures): top, bottom and the droplets. The bottom part has circular inserts to slot in the droplets after printing.Each variant comes with two fitting profiles:Tight. The lid fits tightly on the base. Magnets are not needed. Depending on your filament shrinkingproperties, this fit may be too tight. Loose. The lid fits loosely on the base. This fitting works best with magnets to keep the two halves in place.I found through my tests that both provide enough grip to remain closed, either by friction or by magnetism. Pick your favourite.Printing suggestionsSuggest plate. Smooth PEI (high-temperature)Suggest nozzle. 0.4mmSuggest layer height. 0.2 for a quick print; 0.12 to 0.16 (or adaptive) for more aesthetically pleasing circlesAssembly instructionsOriginally, I envisioned this deck as a snap-fit deck using eight 8x2 mm magnets. You can see each part has hidden magnet holes to install 8x2 mm magnets. However, after printing this twice, I noticed that the friction between top and bottom parts of the case are enough to hold the content firmly in place. Feel free to glue in the magnets for an extra strong closure, however, I don't think they are needed! Your choice of filament and the shrinkage property of your filament may anyway produce slightly looser parts. In that case, magnets will be useful. If you are not using magnets and you print using standard Bambu Lab filaments, you may find it useful to wiggle the lid left and right to close it instead of pushing and pulling it directly along the vertical axis.  

Boost MeIf you liked Gus the Goose who was inspired by the game "Untitled Goose Game", please consider giving me a boost to allow me to continue creating bigger and better things!Meet Gus, a 2-foot-tall Untitled Porch Goose that is inspired by the mischievous waterfowl from Untitled Goose Game. Designed to bring a touch of playful chaos to your doorstep, this life-sized goose is crafted with fine details to capture its iconic shape and stance.What truly sets this porch goose apart is its interactive beak. If you insert a small strong magnet (approximately the size of a neodymium coin magnet) inside the beak, the goose gains the ability to "hold" objects, just like in the game. Whether it's a set of keys, a small gardening tool, or your neighbor's newspaper (for honking reasons), this goose can clutch lightweight metallic objects, adding a fun, game-accurate functionality to your display. Perfect for fans of the game, quirky lawn decorations, or anyone who appreciates a bit of controlled chaos, this Untitled Porch Goose is ready to stand guard—and occasionally steal things—for your home!

A complete set of Kitchenware bins for Gridfinity of all sizes + expandable and modular pieces. Enjoy!

A parametric and customizable rugged storage box or toolbox for OpenSCAD. Make and customize your own boxes! | Download free 3D printable STL models

This episode is sponsored by KiwiCo! Visit https://kiwico.com/zack and use code ZACK to save 50% off your first crate from any club for ages 3 or older.Witne...

uconsole micro external antenna mount | Download free 3D printable STL models

Here is an antenna design that drastically improve Wi-Fi reception. You can clip the antenna in two position, quickly and easily, depending of the situation :Plated against the chassis (more compact but less range)Deployed (better reception more bulky)

Smash! If you like my models, please like, share, download, boost, rate and all the amazing good stuff! Most Dice Towers are awesome additions to your board game experience. But it doesn't make rolling the dice any easier. If anything, it makes it more fun but also slightly more inconvenient. Smash! resolves this by having an auto reload functionality. Just smash the top and the dice are automatically rerolled for you. You can still drop them in from the top or change them out. But then, just Smash!  The dice tower should handle any dice up to a diagonal/diameter of 30mm. There is a printable spring included in the print file, but due to creep this spring can fatigue over time and not lift the top of the dice tower up again (but can easily be replaced). It is therefore advised to use an 80*8mm spring (not yet tested because of Bambu shipping mess, but it should work). If you go the printable spring route, it works better if you lube the coils of the spring and the bottom of the top part (ptfe/silicone) to reduce friction. Depending on the filament used you might need to swap it out once in a while, or upgrade to the coil springs mentioned above. Just drop the coil springs (or slide the printed spring) in place and slide the top part of he tower down. It will click in place and if you use the printed spring you might need to nudge the top backwards. If you ever want to take the castle apart again, there are two holes in de side through which you can unlock the clips that keep the castle together. If the bridge doesn't come down by itself you might need to work the hinges a bit before it becomes a smooth action. If that still didn't help, use a bit of lube on the hinges. If the top parts has issues reach the bottom, lube like described above and make sure the spring is pushed all the way into the slot. If you are not using the provided print profile, make sure to disable supports, whatever Bambu Studio tries to tell you. V2 improvements:Stiffer, longer lasting, springEasier removal of printed springTiled pattern on the stairsBetter Maze (reduced chance of dice jumping out when using the top) V3 improvements:Made tab connection bigger with a filletAdded an M3 grub screw hole above the stairs as backup if your tabs breakAdded thickness to the bottom prevents spring from protruding and makes the terrace a bit heavier Other than that, just Smash! it and have fun! Happy Printing! - Rossero Coil spring: BB019http://store.bambulab.com/products/compression-spring?variant=49424974446940 And don't forget to check out my latest project: 

This is a rack mount solution for the EU2251 Cabel Modem from Spectrum.  Requires 2 M3x16 screws to lock the modem in place. This is a non-destructive mounting solution, they are screwed into the mounting bracket and rest against the back edge of the modem to prevent it sliding out of the mount. The panel matches my 10in Omada Server and Patch Panels. I mounted mine in an enclosure with these rails from Amazon but anything similar should work: https://www.amazon.com/gp/product/B07NKHY1PN

Key AdvantagesOnly 7g of filament per ring.Compatible spool brand name impressed.Rounded contour helps with traction, avoids pullback errors and stabilizes the spool inside the AMS.Rounded contour lowers the chance of damaging plastic storage bags.Flat variant for full AMS compatibility (see tolerance and compatibility section)200mm diameter variant for slightly bigger spools (199mm is the standard size)DescriptionThis isn't merely a typical cardboard spool adapter. By decreasing its contact area by approximately 50-60% compared to standard adapters, it significantly enhances contact pressure. Consider it akin to winter tires on a car, which generally require higher pressure to minimize their contact area with the ground. Additionally, its rounded edges help stablizing the Spool inside the AMS and minimize the likelihood of damaging plastic vacuum bags. The adapter is not only lightweight, weighing a mere 7 grams of filament, but it is also reusable and easily attaches in the same manner as conventional adapters. This adapter has proven to be a game-changer, eliminating the need for other AMS modifications that claim to address retraction and entanglement issues. Remarkably, I’ve found that spool weights are no longer necessary. However, as with any solution, individual results may vary. Happy printing!TolerancesCompared to plastic spools, cardboard spools are more vulnerable to various external factors, such as moisture, temperature fluctuations, and variations in the production process (up to +/-2mm). Consequently, you may encounter slight variations in the fit, which can range from slightly looser to tighter. In extreme cases, the spool adapter may not fit at all. In these scenarios, you can make the necessary adjustments to the model's scale using the Bambu Slicer for both the X and Y axes. Ensure that you uncheck the "uniform scale" option before proceeding. If your spool's diameter exceeds the default setting, consider increasing the scale by .25%. Conversely, if your spool's diameter is smaller, reduce the scale by .25%, and your setup should be ready for use.CompatibiltyeSun Cardboard Spools tend to be on the larger side of the spectrum. While they can fit without an adapter, when paired with the rounded adapter, they surpass Bambu Labs’ specifications. Consequently, users have a couple of options to address this:AMS Lid Spacer: Utilizing a spacer for the lid can accommodate the larger spools effectively.Custom Backside Rollers: Alternatively, consider implementing custom backside rollers specifically designed to support these larger rolls.For a straightforward solution, leaving the lid open (or at least not locking it) provides ample room for the spool.For individuals who prefer not to alter their AMS and wish to close the lid, I have incorporated a nearly flat variant that aligns with Bambu Labs’ specifications.PrintingWhen it comes to printing, you should produce two adapters for each cardboard spool. It is advisable to steer clear of materials that exhibit low friction, such as Silk-PLA, to ensure optimal performance. Most of the time I use Standard PLA.Other Filament BrandsThis adapter is available for other brand's cardboard spools (Link to Collection):3DGenius3DHojorAceaddityAnycbicAnycubic Pantone SeriesATABblifeColorfulComgrowCopymaster 3DCrealityCUIEEDDikaleDO3DDuramic 3DElegooENISINAEonoEryone / Eryone 2024+eSunFiberonFilafarmFirosFlashforgeFormFuturaGeeetechGembirdGiantarmGNVTNTPGratKitGrautsInlandIWEColorJAMG HE ConjureJayoJustmakerKexcelledKingroonKinluotKretrumLanduLovoonMaertzMchyiMeltbroMKOEMNinetecOEM Mika3DOvertureOVV3DPanchroma (by Polymaker)PolymakerProtopastaR3DRaise3DRedline FilamentReflowReprapperPergearPinuotoPlasportPrima CreatorPrindanoSainSmartSepdanceSmartfilSovolSpectrumSunlu Elite SeriesTinmorryTronxyTTYT3DTwo TreesUjoybioYousuYOYI YOYIXVICOXZN

Simple hex display shelf. There are 2 models, one of the shelf and one blank hex to add spaces between shelves as needed.

No more water rings!I hate how quickly my toothbrush charger gets dirty due to constant water contact, so I created these liners and simple liner holder. These use very little material so you may choose to either dispose of them, or give them a sanitizing bath when needed. Boost MeIf you enjoyed this model, please consider boosting it to encourage the creator to continue developing this and other models! For non-bambulab users, remove the top layers when slicing and increase the sparse infill to 50% then choose a few different patterns for a interesting finish on top. Change Log09/10/2024Included a new profile (V2) with improved geometryNew geometry has a tighter fit on the charger, uses 20% less material, and prints 20% fasterV2 liners do not fit on V1 holdersBoost MeIf you enjoyed this model, please consider boosting it to encourage the creator to continue developing this and other models! 

Llama Duck2 Color AMS, MMU or, ACE ProPLA Basic BlackPLA Basic WhiteCommercial License Membership Available in BioBoost MeBoost if you like!

My wife wanted more space on our small bathroom sink area and asked if I could make a little shelf for us to put our toothbrushes on. This little shelf allows you to bundle up the extra wiring from the chargers and hide them inside the shelf. There are holes on the top/back to allow a 2-prong plug to fit through. I also added keyholes on the back for stronger mounting, though I just used some 3M VHB tape and it sems to be holding well so far.This is my first time 3D modeling anything, so please share any feedback!

Since everybody now owns a Prusacaster, why not also build your own pedalboard? | Download free 3D printable STL models

Make your own pedalboard with this pedalboard profileSuitable for home studio, probably not so much outdoor/gig

3D print our designs including the Cargo Storage System at https://thangs.com/designer/Play%20ConveyorWhat we used for this project: - Printer: Bambu Lab P1S...

Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.

Parametric gridfinity component generator. Generate gridfinity bins, baseplates, and more with just parameters then download the STL.