Public

CLI tool for saving a faithful copy of a complete web page in a single HTML file (based on SingleFile) - gildas-lormeau/single-file-cli

MagSlide – Sliding Monitor Dock for MagSafe & Apple WatchA simple, modular dock that mounts to your monitor and holds your MagSafe and Apple Watch chargers with a clean, slide-in fit.It’s a frame that sticks to the back of your monitor with strong two-sided tape (Alien Tape or 3M VHB recommended), and a slider insert that securely holds your magnetic wireless charger. Inspired by YouTuber Bob “I Like To Make Stuff” and their quick-rotating design they posted recently. I tried to simplify the approach by not using any rotating mechanisms but still have the ability to hide the charger when not using it.Details:Fits MagSafe and Apple Watch charging pucksMultiple sizes are included in a single print profile to fit various MagSafe models. If your MagSafe charger doesn't fit and you can accurately measure it with calipers, just leave a comment with the outer diameter and thickness. I’ll add it for you.Original Fusion file included if you want to tweak for your own purposesPETG is ideal so the little tabs can flex. I’m using PLA for mine and it works fine, but PETG should be slightly better.Install Procedure:Install your charging puck (MagSafe or Apple Watch) into the slider and route the cable out the backSlide the insert into the main frameToo much or too little friction on the slider? You can hit each tab with a lighter for about 3 seconds to soften the plastic. Then gently adjust as needed. Adhere strong two-sided tape (Alien Tape or 3M VHB recommended) to the angled face of the frameClean the back of your monitor with rubbing alcohol – make sure it’s really clean!Before sticking it down: attach your phone or watch to the puck, fully extend the slider, and carefully position it exactly where you want it. Then stick the frame down to the monitor and you are done.Need to remove the puck later? Just slide the insert back out of the frame!Fusion File IncludedI’ve included the original Fusion file in case you want to make adjustments or customize it to better suit your setup. Not everyone shares their source files, but I know it’s helpful. The model is parametric and organized to make edits as easy as possible.ChangesV1.0 - 2025-04-06 Initial release.V1.1 - 2025-04-12 Adjusted frame, changed print orientation.V1.2 - 2025-04-13 Adjusted Slider body so puck can be removed without unplugging the cable. Added optional Long Slider for portrait orientation. 45mm longer than regular version. Includes detent to stop at “landscape” spot. May conflict with camera bump depending on case.Adjusted Frame to be 4mm taller to avoid potential conflict with back of monitor.V1.2b - 2025-07-01Added Sliders for certain MagSafe chargers with detachable cables. Refer to print profile, “Other” plates.“Other - 60mm + Detach Cable” - ESR HaloLock/Kickstand, etc.“Other - 55.6mm + Detach Cable” - Rolling Square Edge Pro Wireless Charger, etc.SupportIf you REALLY like this model and want to buy me a beer, you can find me here. Whether it’s feedback or just a nod of appreciation, I’m always happy to hear from people. But let’s be real - the most effective form of communication is cold, hard cash (or beer).Note on ExclusivityI’m trying out MakerWorld’s “Exclusive Model” feature, which means remixes are forced to be disabled. Not ideal, and I don't like it. Original parametric Fusion source files are included (and STEP), so you can still customize however you like. Shoot me a note if there is something you would like added or modified :)  

Custom foam cutouts for your tools

Opening keynote for dLRN 2015. Delivered October 16th @ Stanford. Actual keynote may have gone on significant tangents… 1 | a year in the garden A week or so ago, I was reading about the Oreg…

A WP-CLI command to list all sites in a Multisite network that have activated a given plugin - iandunn/wp-cli-plugin-active-on-sites

Anthropic is an AI safety and research company that's working to build reliable, interpretable, and steerable AI systems.

Heather Honey has been appointed to a senior position in the Department of Homeland Security. State election officials and voting experts are concerned.

Nix flake for Lossless Scaling's frame generation Linux port - pabloaul/lsfg-vk-flake

Lossless Scaling Frame Generation on Linux

Decky plugin to streamline installation and usage of lsfg-vk; the Lossless Scaling compatibility layer for linux - xXJSONDeruloXx/decky-lossless-scaling-vk

Contribute to jamsinclair/gifski-wasm development by creating an account on GitHub.

Tune in to the lost decades with these nostalgic TV simulators.

How Chinas strategic focus on 3D printing and patent incentives since 2020 created a "minefield".

To protect the digital foundation of essential government services, governments should invest in Open Source as public infrastructure and shift from consumption to contribution.

GitHub Codespaces provides full development environments in your browser, and is free to use with anyone with a GitHub account. Each environment has a full Linux container and a browser-based UI using VS Code.

GitHub Codespaces provides full development environments in your browser, and is free to use with anyone with a GitHub account. Each environment has a full Linux container and a browser-based …

Short Description Beyond Multisite helps WordPress multisite network administrators to better control, protect, and clean their network. Features Plugin Control Module(view documentation) N...

Boost MeAny boost would be greatly appreciated!Layered art with translucent PETGThe color changes depending on the lighting and number of layers!Hand-drawn by us, edited using the ShadowBox Maker, and modified in Bambu StudioAMS is not needed; each layer is a different color. https://www.tiktok.com/@jefflynn3d/video/7535213628916534559 Check out our shadow box collection here:https://makerworld.com/en/collections/6885171-shadow-box 

Chainsaw Key CoverBoost MeIf you enjoyed this model, your boost would make my day! Thank you so much for helping me create more free models! This is a funny idea that popped into my head and I couldn't stop thinking about it so I had to make it :)It's possible to clip it together without glue, but depending on the print quality you might need a drop of glue in some places. Assembly Instructions 

This catch-all tray/dish is one of several similar designs available on my page. It can be used for keys, change, jewelry, or other small items- or simply for display.  It's an easy, no support print using the provided print profile which has split the object into parts with by object settings to ensure the decorative detail prints properly. Oh, and psst- the lovely surface design is just a combination of easy top surface settings and using tricolor or even dual color filaments *single color or gradient filaments will not produce the same results*. If you want to see how it's done, check out my how-to post on the forum here: https://forum.bambulab.com/t/make-your-models-surface-pop-with-a-simple-slicer-hack-6-easy-steps/150995?u=ominous_fyxen Print profiles are provided for tricolor matte PLA and one for a mix of wood and tri-color matte PLA- the wood PLA profile is for a .6mm hardened steel nozzle to help handle the more abrasive wood filament and reduce the chance of clogging- which is more likely with smaller stainless nozzles.  If you like this design, I have several other similar models with this lovely geometric pattern and more in development, so follow me or stop back on occasion to check them out!

Another day, another deck box concept! This time, I wanted to do something more artistic and colourful. It took me four trials re-modeling the same deck from scratch to get the perfect smooth curvature on the edges!CardsThis deck box fits 60 single-sleeved standard 88 mm x 63 mm cards. This is the default format for Magic: the Gathering and Pokemon cards.Looking for the 100 CARDS VERSION? Find it HERE.UpdateNew lid profiles (August 7th). After many feedbacks, I created a new profile with a more loose fitting lid. That should help people that previously had trouble with too much friction. It also helps with the installation of magnets.100 cards version (August 8th). It's now available here.Boost MePaint some colour on my work with a free boost! Printing instructionsChoose two of your favourite brightest colours and print each part separately! This deck box comes into two variants:Base variant (yellow and magenta in the sample pictures): only the top and bottom part.Droplets variant (blue and green in the sample pictures): top, bottom and the droplets. The bottom part has circular inserts to slot in the droplets after printing.Each variant comes with two fitting profiles:Tight. The lid fits tightly on the base. Magnets are not needed. Depending on your filament shrinkingproperties, this fit may be too tight. Loose. The lid fits loosely on the base. This fitting works best with magnets to keep the two halves in place.I found through my tests that both provide enough grip to remain closed, either by friction or by magnetism. Pick your favourite.Printing suggestionsSuggest plate. Smooth PEI (high-temperature)Suggest nozzle. 0.4mmSuggest layer height. 0.2 for a quick print; 0.12 to 0.16 (or adaptive) for more aesthetically pleasing circlesAssembly instructionsOriginally, I envisioned this deck as a snap-fit deck using eight 8x2 mm magnets. You can see each part has hidden magnet holes to install 8x2 mm magnets. However, after printing this twice, I noticed that the friction between top and bottom parts of the case are enough to hold the content firmly in place. Feel free to glue in the magnets for an extra strong closure, however, I don't think they are needed! Your choice of filament and the shrinkage property of your filament may anyway produce slightly looser parts. In that case, magnets will be useful. If you are not using magnets and you print using standard Bambu Lab filaments, you may find it useful to wiggle the lid left and right to close it instead of pushing and pulling it directly along the vertical axis.  

🚨 Ghost CMS just leveled up with 2FA for safer logins! But local devs hit a snag 😬—emails not sending? No worries! Here's how to fix it fast using Gmail & app passwords. 🛠️💌 Stay secure and keep coding without interruptions!

Thanks @vikaspotluri123 really appreciate it. The direct answer (for anyone who’s looking for the same) We can disable this by adding the following to the ghost configuration file. "security": { "staffDeviceVerification": false }

nownownow.com: personal websites with a /now page

Maggie's digital garden filled with visual essays on programming, design, and anthropology

Contribute to TryGhost/ghost-docker development by creating an account on GitHub.

Nix flake for "too much bleeding-edge" and unreleased packages (e.g., mesa_git, linux_cachyos, firefox_nightly, sway_git, gamescope_git). And experimental modules (e.g., HDR, duckdns). - ...

Nix flake for bleeding-edge and unreleased packages.