Dactyl Manuform Keyboard Builds Trackballs and Hotswap - Etsy
IT'S THE SUMMER SALE!! Get 25% off all orders of $100 or more!
This is a Dactyl Manuform keyboard build service with optional trackballs, OLED displays, and rotary encoders.
IMPORTANT! Builds take a while and there's a queue. From placing your order to shipment will be a minimum of one-and-a-half up to two-and-a-half months.
These are WIRED builds running QMK firmware. For Bluetooth fully wireless Dactyl Manuforms, look here:
https://www.etsy.com/listing/1676482207/wireless-bluetooth-dactyl-manuform
All builds are fully hot-swappable (MX compatible switches) and feature rich with the latest QMK firmware with Vial layout support.
For details on all of the sizes, and thumb cluster options we offer, check out these links:
https://wylderbuilds.com/sizes-explained
https://wylderbuilds.com/all-sizes
https://wylderbuilds.com/cluster-options
USB-C cables are included to connect the sides to each other and to your computer.
Available options are:
1. Trackballs (right or left side): + $50
The trackball works both as a standard mouse/pointing device and has a mode to scroll window content.
2. OLED screens (both sides): + $20
These screens display the current QMK keymap layer (the default is three layers, Qwerty, Lower, and Raise) as well as words-per-minute and the current trackball mode. They can be programmed for much more. The default is two on each side, but you can go with one screen if you prefer.
3. Rotary Encoder support: + $20
Rotary encoders are dials or knobs, usually used for volume control or page-up/page-down controls but they can be configured to do pretty much anything. You can have one or two encoders.
The cases are printed in PLA or UV Resin. Resin is more expensive.
All builds will use rp2040 controllers, such as the Pi Pico or Adafruit kb2040, running QMK with Vial support.
SWITCHES AND KEY CAPS ARE NOT INCLUDED! The builds are all hot swappable, so any MX-style switches will fit. Low profile Choc V1 switches can be supported, but reach out before ordering.
We do offer switches at our main store website here:
https://wylderbuilds.com/shop/p/build-extras-switches
We provide a basic three-layer QMK firmware with all features supported along with Vial support so you’ll have total freedom to adjust the layouts however you want. If you have a special layout or code you’d like to include, feel free to contact us and we’ll try to accommodate it if it’s not overly complex.
We warranty our builds for a full 6 consecutive months starting from the date of delivery. If something isn’t working as described within that time, you can send the build back and we’ll make it right. Shipping fees will apply if not within the lower 48 states of the USA. After that time, or if we determine the issue isn’t due a fault from our original build (eg. the build is mysteriously filled with mayonnaise), we’ll charge $40 per hour plus materials to fix.
